Saturday, October 31, 2015

Creative Paperclay® & Gina's Designs Lasercuts Halloween Blog Hop

Happy Halloween my lovelies!  Bwaaahaaaahaaa!  Welcome to today's Halloween inspired blog hop with Gina's Designs Lasercuts and Creative Paperclay®.  Both design teams will be sharing fabulous projects made from Creative Paperclay® and Gina's Designs Lasercuts chipboard.  

We are excited to show off our Halloween projects, and even more excited about the fact that YOU can win a prize.  

1 pound package of Creative Paperclay®
1 sample package of Sandits
$25 shopping spree to Gina's Designs Lasercuts

How to enter - each of these will get you one entry
1) Enjoy the hop
2) Stop by each blog on the hop and leave a comment
3) Pin each project on your Pinterest site
4) Share this post on your Facebook page
5) Like Creative Paperclay Facebook page
6) Like Gina Designs Facebook Page

I think you are going to enjoy the fabulously spooky, and perhaps even freaky, projects by everyone, so sit back, grab a cup of Gruel, (okay, maybe not) and enjoy the hop.  A complete list of the blogs can be found at the bottom of this post.

So here it is, my coffin roadster.  And what do we have inside?  We have Manny Bones with a  goblet full of PiƱa Ghoulada to toast his friend, Justin Pieces, who seems to be sharing his coffin.

I love this coffin box from Gina's Designs, and I knew just how I wanted to use it with my Creative Paperclay® pieces.

Use skull die to cut into the top of the box, as shown.  Remove die cut.

Paint both sides of the coffin box with black gesso and both sides of the skull with white gesso.  Age the skull by lightly rubbing burnt umber antiquing cream over it.  

Glue box together with a white tacky glue.  

Paint Border Lace with Peeled Paint distress paint and adhere around base of coffin box.

Paint wheels with a medium gray paint.  

Use a brad to attach your wheels to the wheel hub and glue skull & crossbones charms to each brad.

Turn bottom of coffin box over and adhere wheels and hubs, as shown.

You can use all sorts of molds with your Creative Paperclay® and Delight modeling compounds.  In the picture below, I have a Wilton cake decorating mold (dark blue), clay molds from Martha Stewart (aqua), and a clear plastic candy mold.  Make as many or as few clay pieces as needed for your project and let them dry, usually overnight.

I used both the Paperclay® and the Delight modeling compound for my pieces.  Both products are so easy to use and give amazing results, as you can see below.  I laid the pieces out to help determine how I might want to place them, and I filled the coffin bottom with Spanish moss.

I painted the pieces with grey acrylic paint, aging the bones by dry brushing with an off white paint.  Silver metallic was brushed over the filigree bits, and the spider, of course, was painted black with a red mark on her back.

I adhered mica fragments randomly to the coffin lid before adhering my Paperclay® and Delight molded pieces.  The hand was gently bent to look like something was trying to reach out from beneath the lid.  Oooooh, spooky!

Before adding my skeletons and other bits to the coffin, I added small metal handles, two on each side, of the coffin.  Then the fun began, adding Manny Bones and his friend, Justin Pieces.  Spider webbing was stretched across the lid and bottom for even more creepiness.

And here are a few photos of the finished coffin on wheels.

On the coffin lid, you can see a better shot of the spider, the creeping hand reaching up the side of the lid, and the pretty filigree pieces.

Looking down into the coffin, you can see all of the skeleton pieces molded from the Paperclay®.

In this picture, you can see the bats from the Spooky Shape Set, painted purple with orange stickles for eyes, and adhered to a spooky tree branch.

And here is a shot of the side of the coffin with those cute handles and fabulous wheels.

And here is a picture of my completed cemetery with the addition of Gina's Designs Tombstone Stand Ups.  You can see how these were decorated in my previous post.

Supplies Used:

Coffin Box
Wheels 1.5 Inch Fancy
Border Sticks Lace
Spooky Shape Set

Creative Paperclay®
Delight™ Modeling Compound

Silicon and plastic molds
DecoArt Media Carbon Black
DecoArt Media Dark Grey Value 3
DecoArt Media Translucent White
DecoArt Media Metallic Silver
DecoArt Media Transparent Yellow Iron Oxide
DecoArt Media Cadmium Red Hue
DecoArt Media Black Gesso
DecoArt Media White Gesso
Tim Holtz/Sizzix Skull mini die
Tim Holtz Distress Paint: Peeled Paint, Seedless Preserves
Mini metal handles (Hobby Lobby)
Stampendous Tarnished Mica Fragments
Halloween embellishments (my stash)

I hope you are enjoying the hop today, and thanks so much for stopping by.  Good luck, and have a very safe and Happy Halloween!!!


Friday, October 30, 2015

Mixed Media Canvas: Halloween Haunted Graveyard

Hello everyone, and welcome.  I am so excited to share one more Halloween project using ColourArte before my final Halloween post tomorrow.  My inspiration for this piece was this haunted house scrapbook paper.  It set the scene perfectly.

Spread heavy white gesso over 10"x10" wood board with spatula.
Try to spread unevenly for a cool texture like this.  It will pay off when you start adding your paints.
Fussy cut haunted house and adhere to board with a  piece of torn corrugated card board, as shown.
Spread uneven coat of white crackle paste over corrugated card board and let dry.
Using a paint brush, spread a light coat of water over the background and pick up Blue Flame Silks, blending with Periwinkle Silks.
Continue using water to spread a coat of Orange Peel Silks around the house for an eerie glow.  Continue adding Orange Peel with a dabbing motion until you like the look.  Allow to dry.
Put canvas in a "spray" box , cover top portion of canvas, and spray the corrugated, crackled section with Radiant Rains Butternut and Autumn Leaf.  Let dry.
Dab Radiant Rains Wine & Roses dauber around perimeter of Orange Peel painted section.
Then spritz with lots of water and allow the colors to run.
Dab Radiant Rains Rich Cobalt and a tiny bit of Nutmeg dauber around the outer areas, spritz with water and allow those colors to run.  Let dry.
Spritz background with water droplets and let those dry for a mottled effect.  Here are a few closeups of those areas.

Use a damp paintbrush to pick up Chestnut Brown Primary Elements (PE) and brush over corrugated card board.  Add water to spread it, continuing to add the Chestnut Brown until you achieve the darkness and coverage you desire.
Die cut fence pieces from black chipboard.  Mix white gesso with PE China Black to make shades of grey and dry brush over fence pieces to age them, adding lighter grey to areas where the moonlight might be hitting the posts.  (TIP: Add more gesso and less PE to obtain lighter shade of grey).
Die cut graveyard from black chipboard.  Mix white gesso with PE China Black to make shades of grey and dry brush over tombstones to age them, adding lighter grey to areas where the moonlight might be hitting them.
Adhere graveyard chipboard to lower right hand side of canvas, as shown.
Pick up what's left of the gesso/China Black PE and base coat Haunted chipboard.
Add Ancient Coin PE to the mixture and coat the word again.
Mix Ancient Coin PE with Clear Glaze Medium and paint Haunted chipboard, let dry.

Mix Chestnut Brown and Nutty Oak PE with white gesso and coat branches with color mixture.

Mix some of the China Black PE in and add shading to the lower parts of the branches to give depth and form shadows.
Adhere branch above Haunted chipboard word.  While that is drying, spread Clear Distress Crackle Paint through Shattered layering stencil and let dry.
After crackle paint dries, it will look like this.  As you can see, it dries clear, allowing the colors beneath it to show through.
To bring out the cracks, mix PE China Black with water and go over the area with this "wash" of black.  As you can see, it seeps down into the cracks and brings them to the surface.
Adhere second branch along lower left side of canvas, forming a tree.  Adhere fence pieces along bottom of canvas, bending them outward and clamp down while glue dries.
Stamp distressed crows and spider with black archival ink.
Stamp owl onto scrap of Haunted paper with black archival ink and fussy cut.
Add owl eyes and glue to top tree branch.  Glue a metal skull and crossbones embellishment, as shown.
Stamp Undertaker sign with black archival ink.  Center tag die over stamp and cut out.
Add a piece of chipboard behind the tag for stability.
Adhere to canvas with foam tape.  Adhere spider over crackled spider web portion.
Mix PE China Black with Clear Glaze Medium and paint the scaredy cat.  
Add some animal eyes and adhere scaredy cat to center of fence.  Add berry garland along fence.
And here it is, all finished and ready to decorate your home, hang on the wall or place in an easel.
And a few more close-ups to show the dimension achieved by shaping the chipboard pieces.

ColourArte Supplies Used:

Silks Acrylic Glaze:  Periwinkle, Blue Flame, Orange Peel
Radiant Rains Shimmering Mist:  Butternut, Autumn Leaf
Radiant Rains Color Daubers: Nutmeg, Wine & Roses, Rich Cobalt
Primary Elements:  Chestnut Brown, Ancient Coin, China Black

Other Supplies Used:

My Mind's Eye Haunted 12x12 paper pad
Black chipboard
White Gesso (Liquitex)
Heavy Gesso (Liquitex)
Tim Holtz Rubber Stamps: CMS 139 Halloween Cutouts (owl), CMS240 Undertaker (spider)
Tim Holtz Shatter layering stencil
Tim Holtz dies: On the Fence, Graveyard, Bird Branch
Fancy Tags 2 (Spellbinders)
Distress Clear Crackle Paint (Ranger)
Memory Box F1394 Distressed Crows
Black Archival ink pad

October is Breast Cancer Awareness Month.  In honor of those we know who have battled with this disease, please be sure to make a generous donation to the National Breast Cancer Foundation.

Thanks so much for joining me today, and I hope you have a very safe and Happy Halloween!