Showing posts with label Gingerbread House Mini Album Tall. Show all posts
Showing posts with label Gingerbread House Mini Album Tall. Show all posts

Thursday, December 13, 2018

Gypsy Soul Laser Cuts' Christmas Mini Folding House Shrine

Happy holidays to everyone!  I hope you are enjoying the winter weather, wherever you are!  Today, I am going to be using a couple of Gypsy Soul Laser Cuts' newest sets, the Little Folding House Shrine and the Tiny Christmas Shapes sets.  These are so cute and are sized just right to work together perfectly!

Outside with doors closed

Outside with doors open


Inside with doors opened
Make hinges by cutting two pieces of Tyvek to 2-1/2" x 3/4".  Paint both sides of the Tyvek with gold acrylic paint.  Paint both sides of the house with the gold acrylic paint.  One side (showing) only needs to be painted around the edges.  Set aside to dry.


Glue Tyvek "hinge" pieces to the three house pieces, as shown.  Leave enough space between pieces to allow the doors to open and close.  


Outside
Inside

This is a great time to use some of those paper scraps you've been saving.  These two pieces are from a Basic Grey Mistletoe & Pears paper pad.  



Run paper through Xyron 3" sticker maker.


Xyron 3" sticker maker

Cut paper just slightly smaller to fit each section, leaving a scant hint of gold edge.  Adhere to each panel. 


Inside

Outside

Apply triangle paper pieces to the roof top, as shown, on each side, using the opposing prints. 

Inside
Outside
Outside when closed in front
Add a strip of the gold Dresden border along the edge where the two papers meet, as shown.

Inside

Outside
Outside when closed in front
Cut two of the tiny scalloped shingles in half and paint with white acrylic paint or white gesso.  Let them dry, then glue to the top portion of the roof, as shown.

Outside when closed in front
Outside view on back
Fill in both sides of the roof top with the snow writer snow, as shown. 

Outside when closed on front
Paint each of the pieces with acrylic paint, as shown. 


Glue a small piece of mica to the back of the window frame.  Use the Snow Writer to add snow to the window frame and the green tree. (NOTE:  I added a wash of Burnt Umber acrylic paint to the window shutters to age them.)


I found a little white button in my stash, so I stamped "25" on it with black permanent ink, then ran a piece of red floss thorugh the button and tied it off. 


Glue it to the top portion of the roof on the outside of the house, as well as the painted chipboard pieces, as shown.

Inside
I cut a printed word "NOEL" from one of the papers in the pad and glued that to the roof portion of the outside of the house.  Glue remaining chipboard pieces, as shown.  (NOTE: I glued a tiny strip of chipboard beneath the shutters, close to the window, so that I could angle them up and outward from the house.  This is optional, of course).

Outside
I have included a few more close-ups of the painted chipboard pieces for you.





Supplies Used:

GSLTiny Shingles Sampler
GSL Little Folding House Shrine (contact store)
GSL Tiny Christmas Shapes (contact store)
GSL Gingerbread House Mini Tall (window &  shutters)
2 strips Tyvek (2-1/2" x 3/4")
DecoArt Glorious Gold Metallic paint
DecoArt Americana Lamp Black acrylic paint
DecoArt Media Fluid Acrylics
  Diarylide Yellow
  Hansa Yellow Light
  Primary Magenta
  Translucent White
  Cadmium Red Hue
  Burnt Umber
  Sap Green
DecoArt Snow Writer
Basic Grey Mistletoe & Pears paper pad 
Xyron 3" sticker maker
Gold German Dresden border
Liquitex white gesso
Mica Pieces
Alphabet/Numbers stamp set
Black archival ink pad
White button
Red floss


Thanks for stopping by, and have a very Merry Christmas!!!

Barbara

Thursday, December 22, 2016

Tall Gingerbread House Mini Album with Gypsy Soul Laser Cuts

Hey everyone!  It's Christmas time, and what's better than a Gingerbread House?  How about a Gingerbread House Mini Album Tall from Gypsy Soul Laser Cuts.  It's beautiful, fun, and best of all, has absolutely no calories!

Front

Back

This shape set from Gypsy Soul Laser Cuts has lots of shapes suitable for decorating your very own Gingerbread House. 


Cover all album pages with the print paper.  I used the new Sweet Peppermint paper from Prima.  I also laid out some of my shapes to see how they would look.  It is always a good idea to take a picture at this time so it is easy to remember placement later.


Distress all edges with brown distress ink, and then mark and punch holes for the binder rings.


To decorate the door, I used two shutter pieces and cut them apart, as shown.  I used the top left and lower right pieces to form one solid piece that now fits the length of the door.



Cover the door with a piece of the paper from the collection and add a small brad for a door knob.  Paint the two shutter pieces with red paint and glue to the door front.


Here are the pieces I have so far.  Each of the pieces were painted with acrylic paints, as shown, and the candy pieces were glued over the topiary tree.  I wrapped bakers twine around the two columns and used pictures from the paper collection to glue behind the windows. 


Add the laser cut elements to the front page, as shown.  Add snow along the roofline, windows, door frame and topiaries.  Add liquid glass with a sprinkling of glitter to the candies on the topiaries to make them look sparkly and shiny, like hard candy.  Add tiny drops of red 3-dimensional paint to the wreath to look like berries.


Page 2:  Die cut a decorative border strip from cream card stock and  adhere to left side of page.  Add images from the paper collections with foam dots.  Paint three  candy canes with red and white acrylic paint, adhere as shown.  Lastly, punch a decorative snowflake edge that has been distressed with brown ink and add along the roof top.


Page 3:  Paint two candy canes with red and white paint, adhere along roofline, as shown.  Make a mini paper rosette and add to the center top of he roof, and then place paper images, as shown.  The train image was glued only around the bottom and sides to form a pocket for journal cards.


Page 4:  Adhere strip of paper that has been die cut with the rosette die along the roof line, and an image circle punched from the paper with foam dots.  The Santa image was glued along right side and bottom area to form a pocket.  Two pieces of card stock were cut to 3"x4", forming a journal card, and images from the paper collection were adhered, then inserted into the pocket, as shown.


Page 5:  Ribbon was adhered along roof line, and a rosette was placed in the center, as shown.  The three stockings were adhered with glue dots, along with the girl image.  A gold Dresden Christmas tree was antiqued with brown ink and adhered with the Joyful image, as shown.


Page 6:  Red Dresdent border was adhered along roof line, and the wreath with bow were painted and adhered to center of roof.  The remaining images are from the paper collections.


Page 7:  Pink ribbon was adhered along roof line, and a pink bow was tied and added to the center of the roof.  A strip from the paper was adhered to the lower half of the page, gluing only the sides to form a band to slip journal cards into.  The Cardinal was adhered over the wreath image with pop dots for dimension.



Page 8:  A snowflake punched edge was added to the roofline, along with a rosette to the center.  A trellis design was die cut, distressed with brown ink, and adhered to the page, as shown.  The bell images were adhered with foam dots for dimension.  Two gingerbread cookies and word stickers were adhered, as shown.


Page 9:  Paint two candy canes and a round candy with red and white paint, adhere candy canes along roofline, as shown.   Make a rosette from the paper and adhered the round candy piece to the center.  Fussy cut a second image from the bottom of the sheet, and adhere to the bottom of the page with foam dots.  This makes a thick pocket for holding many journal cards.  



Page 10:  Red Dresden border was adhered along roof line.  Die cut images of ornaments from the paper collection were adhered along the top, while a few were adhered with pop dots for dimension.  The Light String Border was painted with red and green paints, and liquid glass was added to the light bulbs.  This was glued along the right side of the page, along with paper elements from the collection.


Page 11:  Pink ribbon was adhered along roof line and an image from the paper was added to the center with foam dots.  The doll and cookie image were glued only along the side and bottom to form a pocket to hold journal cards.  Three round candies were paint with red and white paint and added to the background, as shown.



Back cover:  Red Dresden border was adhered along roof line.  Paper images were adhered, as shown.  Two  trees, candy cane, and round candy were all painted and adhered to page, as shown.


Use binder rings to bind the book, and tie pretty ribbons onto the rings.  As you can see, it has become quite fat and chunky, but I love it like that.  


Supplies Used:

GSL Light String Border
Prima Sweet Peppermint Paper Collection
Tim Coffey Christmas Embellishments
Spellbinders S4-436 Anne Border Strip
Cream card stock
Gold Pearl 3D paint
Distress inks:  brown, green, evergreen
DecoArt Americana Chalk Paint
  Vintage
  Romance
  Rustic
DecoArt Americana Multi-Surface Satin
  Cotton Ball
DecoArt Media Liquid Glass
Assorted Brushes
Timeless Twine (Bella Creationz)
Mini brad (for doorknob)
Sizzix dies: Mini Paper Rosettes, Label Trellis
3D Foam dots
Decorative punches (Martha Stewart)
Assorted Ribbons

Thanks for stopping by, and have a very Merry Christmas!!!

Happy Holidays all!!

Barbara