Thursday, June 22, 2017

Cabana Row House with Gypsy Soul Laser Cuts

Hi everyone!  Today, I want to share a fun little Summer project using these Cabana Row Houses from Gypsy Soul Laser Cuts.  Not only would these cuties make great mixed media projects or table decorations and favors, but they would also make wonderful gift boxes since the bottom folds up, but does not have to be glued in place.  Hmmmm ... think of the possibilities.  I'm sure you can come up with even more ideas. 





When you get the set, look for the tiny alphabet letters (A through E) on each piece to match up the house with its coordinating roof piece.  They are so simple to put together, just fold the house up and attach the roof. 



House E

Cut one paper strip 2-3/8" x 8-1/2" and one 2-1/8" x 2-1/8" square.  Cut two triangles for the eaves.  I used the box itself to measure and trace the eaves onto back of paper.  



Run paper through Xyron sticker maker and edge paper strips with Evergreen Bough distress ink and foam blending tool. 


Adhere paper pieces to bottom section of house. 



Place red liner tape along roof and side tabs, as shown.  



Adhere a  half round window on each side of house under eaves.  Set aside.


Cut a piece of print paper cut to 2-3/4" x 4-3/4".  Run strip through Xyron sticker maker and edge paper with Vintage Photo distress ink.



Adhere paper to roof top.



Spread a thin layer of  light molding paste through stencil, let dry.  



Lightly add Vintage Photo distress ink to paste with blending tool.



Now back to the house.  Remove red liner from taped sides.  Fold side tab in and attach to side of house.



Fold tabs in and close up bottom of house.  You can also tape this in place if you do not plan on using the house as a gift box.



Fold roof tabs in and attach roof.  Glue two small square windows from the Seaside Doors & Windows set to the sides of the house, as shown.



Cut bottom portion of smallest Vintage Ladies Silhouette.



Glue bottom portion that was cut off back onto silhouette, but higher up.  This will shorten the lady and make her size more appropriate for the size of the house.



Use a spatula to apply a thick coat of Heidi Swapp Hot Pink Metallic Texture Paste to vintage lady, disguising chipboard join and swiping lines in the paste to resemble folds of fabric in her dress.  Set aside to dry.



Paint both sides of the vintage bicycle with Vivid True Silver.  Let dry, then add Vintage Photo distress ink, which will give it a coppery look.  Don't cover all of the silver, though.  


Spread light molding paste over hot air balloon and draw lines through paste, as shown.  Set aside to dry.

Paint balloon with Vivid Ultra Metallics, first with Lemongrass, then African Jade, then Pink Azalea, and lastly with Teal Zircon.  Let dry, then lighten the color with African Jade.




Cut a 5" piece of 20 gauge copper wire and adhere to back of balloon.  I used a wet glue and a piece of tape.  Let glue dry before handling.



Turn balloon over and repeat process for opposite side, i.e., add light molding paste, draw lines through it, and color with the Vivid Ultra Metallics.  This will cover where you have added the coper wire on the back.



Make a little twist in the copper wire, as shown.  



Use a paper piercer or awl to make a tiny hole in the roof top and insert wire through it.  Add clear drying glue to hold in place.


Adhere vintage lady to left side of house.

Decorate house as you like.  I have added some flowers just below the half round window, and adhered the vintage lady to the left, and the vintage bicycle was added to the right with a foam dot to make it look like it was propped up against the house.




Here are a few views from different angles.




GSL Miniatures Shape Set - Guy Thing
Paper Studio Country Road 4.5" x 6.5" paper pad
ColourArte Vivid Ultra Metallics
  True Silver
  Lemongrass
  African  Jade
  Pink Azalea
  Teal Zircon
Evergreen Bough, Vintage Photo distress ink
Foam blending tool
Xyron 3"sticker maker
Golden Light Molding  Paste
Spatula
Tim Holtz Stripes stencil
Heidi Swapp Hot  Pink Metallic Texture Paste
20g copper wire
Quick Grab Tacky Glue (Aleene's)
Miniature flowers (Paper Studio)

I hope you enjoyed my project today.  Be sure to check out the fabulous laser cut chipboard from Gypsy Soul for even more ideas to decorate these Cabana Row Houses.  

Thanks for stopping by, and have a crafty day!

Barbara

2 comments: