Steampunk Key Wall Art with Gypsy Soul Laser Cuts

Hi everyone!  I'm in a steampunk mood!  I just got this Key Wall Art Heart in the mail, and now I'm chomping at the bit to make something with it.  I had to first decide if I wanted to put it on a canvas or let it stand alone.  Well, you can see what choice I made below.

So, the first thing you need to do is remove any pieces that didn't fall out.  I just use a piercing tool for this step.  A craft knife works well, too.  I just had a few little pieces to remove.

Next we need to prime the chipboard, and for that, I'm going to use black gesso.  It will seal the chipboard surface and let me use less of my more expensive paint I'll be using for the next layer, which is also black on the key.

Paint key portion with two coats of Metal Smith Iron paint, letting first coat dry before applying the second coat.  This paint contains real iron particles.

Following directions on the bottle, spritz the key with the Rusty Activator while the second coat is still tacky.  Wait five minutes and spritz again.  It may take up to two hours for rusting to occur.  So set this piece aside and work on the heart piece.

Rusted patina complete

Paint the heart section with Metal Smith Bronze paint, letting the first coat dry  before applying the second coat.  This paint contains real metal particles.

Following directions on the bottle, spritz the heart with the Green Patina Activator while the second coat is still wet.  Patinization occurs gradually while drying.

To get random areas of blue patina, I painted random spots with the Bronze Metal Smith paint again, and while still wet, I dribbled the Turquoise Patina Activator over the wet paint.

Paint one of the  Propellers with the Metal Smith Malachite paint, letting the first coat dry  before applying the second coat.  This paint contains real metal particles, too.  Before the second coat dries, spritz with the Turquoise Patina Activator.

Choose one of the Dragonflies Fancy and paint it with the Bronze Metal Smith paint and use the Green Patina Activator.  I painted both sides of dragonfly since part of it will be hanging over the key and may be seen.  After the patina formed, I decided to paint the wings with the Metal Smith Malachite paint, then I used the Turquoise Patina Activator to get a rich blue patina with a bit of the bronze patina peeking through.

I painted one end of a bamboo skewer with Bronze and used the Green Patina Activator.  The other end I painted with Malachite and used the Turquoise Patina Activator.

Glue the heart piece over the matching area on the key.  Use an awl to make a hole in the center of the key, as shown, large enough for the skewer to fit into.

Stick the propeller onto the pointed end of the skewer and trim off at around 1/2" to 3/4".  

Remove propeller and glue skewer into hole, as shown.

Glue the propeller to the pointed end of the skewer.  Gently bend two opposing propeller blades downward for realism.   I added a small gear on top of the propeller after the glue dried. See close-up photo near end of post.

Cut a piece of the Chainlink to fit behind the heart opening.  Use Vintage Gold metallic wax over chainlink piece.

Glue the chainlink over the opening on the back of the key.

Here is what it should look like at this point.

Wrap a piece of twisted wire around the key, as shown.

Cut a piece of the bronze-painted end of the skewer the size of the dragonfly body and glue it, as shown.  

Glue dragonfly to key, as shown.  The skewer adds just enough lift to adhere the dragonfly above the wrapped wires, too.

I added metal embellishments to the key, as shown.  Here are some close-ups of those areas.

Supplies Used:

GSL Key Wall Art Heart
GSL Dragonflies Fancy
GSL Propellers
GSL Chainlink 8 by 8 Inch Panel
Miss Lillian's Metal Smith Paints
  Bronze
  Iron
  Malachite
  Rusty Activator
  Green Patina Activator
  Turquoise Patina Activator
Aleene's Fast Grab Tacky Glue
Liquitex black gesso
Metal gears and embellishments
Bamboo skewer
Assorted brushes
Vintage Gold Art Alchemy Metallique Wax (Prima)
Vintaj brass twisted wire 21 gauge

I hope you enjoyed my project today, and that you may be inspired to make one of these wall art pieces for yourself.

Thanks so much for stopping by, and I hope you have a super crafty day!

Hugs,
Barbara



SaveSave

Rusty Steampunk Altered Notebook Tutorial

Hi everyone!  Barbara here again with another fun project using Gypsy Soul Laser Cuts.  I found this inexpensive little hardback notebook in the $1.50 bin of my local craft store.  I am always making notes of things I want to create, or things I want (need) to do, and so, a notebook with a hard cover is the perfect substrate to add layers chipboard embellishments.

This is my finished "Bright Ideas" notebook, hence, the light bulb, which suggests that there just might be some good ideas hiding inside this little book.  And, as you can see, it is rusty and very Steampunk!  So scroll down for more information on l how I made this rusty, crusty and dusty cover using Andy Skinner's rust technique with and a few added products for even more crustiness.

Cut two pieces of paper to measure 4-3/4" x 7-1/8" for this particular book.  If your book is a different size, cut the paper slightly smaller than the front of the book, without covering the spine.   Adhere the paper to the front and back of the book.

I cut the gears texture sheet apart, leaving the top and left edges straight to line up against the edge of the book.  The bottom edges were cut more randomly between the gear shapes. 

Adhere this piece to  the top of the book, a shown.

Arrange and adhere the chipboard pieces to your liking.  I layered some of the gears, clock hands, and propellers for added depth and dimension.

Paint front and back of book with a wash of white gesso.  Remove some of the gesso from the script paper with a damp paper towel if you want to see more of the print show through.  Place a piece of paper between the book covers and the pages to protect them during this process. Let gesso dry.

front cover

back cover

Spread splotches of texture sand paste randomly over the chipboard and open areas of the book cover.  Let dry.

front cover

Turn book over and spread modeling  paste through gears stencil.  Let dry.

back cover

Let modeling paste dry.  This is how your back cover will look.

back cover

Paint front and back covers with a wash of Paynes Grey + water.  In the photo of the front, you can see the gritty texture left by the texture sand paste.

front cover

The back cover shows the stenciled gears and the texture sand paste I added after painting.  I simply used my finger to apply a very thin, random coat over the background.  Let paste dry.

back cover

Paint both front and back cover with a wash of Quinacridone Gold and let each side dry.  Then paint both sides again with the Quinacridone Gold direct from bottle for a deeper tone.  Let dry.

front cover

back cover

Add highlights by painting covers with Translucent Yellow Iron Oxide, concentrating on the sanded sections.  This adds a really subtle color variation.  

front cover

back cover

Next, add splotches of Titan Buff randomly over covers by applying with finger and very little paint.  Let dry.

Apply Cobalt Teal Hue in the same fashion as previously done with Titan Buff.  Let dry.

Now apply a wash of the Quinacridone Gold + water over the entire cover, front and back. This will tone down the colors and make them look more grungy.

Apply small amounts of Rusty with finger, just hitting high spots and edges very randomly.

Highlight high spots and edges with Rose Quartz Treasure Gold.  Use sparingly and apply with your finger.

Shade chipboard pieces with a slightly watered down Paynes Grey, allowing the paint to collect in the nooks and crannies.  Glue metal letters "Bright Ideas" along the left edge of front cover, as shown.

Repeat shading process on back cover with slightly watered down Paynes Grey, allowing the paint to collect in the nooks and crannies.

Finish off inside covers by adhereing print scrapbook paper of your choice to the inside, as shown.

Supplies Used:

GSL Steampunk Lightbulb Set
GSL Texture Sheet Gears 6x6
GSL Steampunk Shape Set
GSL Gears Shape Set
GSL Propellers
Hardback note book (5"x7")
7Gypsies print papers
White gesso (Liquitex)
Mixed Media Adhesive (Derivan) (or any white glue or gel medium)
Light Molding Paste (Golden)
Texture Sand Paste (DecoArt)
DecoArt Media Fluid Acrylic Paints 
  Quinacridone Gold
  Transparent Yellow Iron Oxide
  Paynes Grey
  Titan Buff
  Cobalt Teal Hue
Rust Effect Paint (Viva Décor)
Rose Quartz Treasure Gold metallic wax
Metal Embellishments (from my stash)

I hope you enjoyed my remake of a fairly non-descript notebook into something  you just might want to record your "Bright Ideas" for posterity.  Of course, if Steampunk is not your thing, I would suggest that you check out the Gypsy Soul Laser Cuts online shop to see the wonderful selection of chipboard in just about any theme you can imagine.  Make it your own!

Thanks for stopping by, and have a great day!

Barbara