Showing posts with label Valentine's Day card. Show all posts
Showing posts with label Valentine's Day card. Show all posts

Thursday, February 9, 2017

Romantic Valentine's Day Cards

Hi everyone, and although a bit early, Happy Valentine's Day!  I want to share a couple of vintage Valentine's Day cards with you today.  Gypsy Soul Laser Cuts has a wonderful selection of romantic style chipboard that is just perfect for all of your card making projects, or try them in your scrapbooking too.


My first card has a lot of brown in it.  I was hoping to keep it somewhat feminine but also be appropriate for that special man in my (your) life.


I cut tan card stock to 10" x 7", folded in half to make my 5"x7" card base.  Then I cut layers of print paper from the Rossibelle paper collection, sizes shown in the photo below.


I distressed the edges of the layers with a distressing tool, then edged with brown distress ink.


The floral strip was punched with the bracket punch.


The paper pieces were all layered to the card base, as shown below.  Pieces of thin fun foam were added beneath a couple layers just to add dimension and interest.  


All chipboard pieces were first painted with white gesso.  This seals the chipboard and prepares the surface for your inks.  It will also keep the chipboard from sucking up large amounts of your ink or paint.  Use whatever inks or paints you have that match colors in your chosen paper.  The solid heart was covered with a piece of the pink print paper and the edges were sanded with an emery board.


The remaining chipboard pieces were colored with Prima ink pads, as follows:

Filigree heart frame - inked with Old Rose ink
Solid heart - covered with pink print paper, stamped with Prima 961961 and Tin Can ink, edged with Shabby Tote ink
Be Mine - inked with Vintage Pink and Turquoise Stone inks, edged with Black Coal inks
XOXO - inked with Garden Green, Olive Vine and White inks
Border lattice heart - inked with Tin Can ink


On the back of the filigree heart, I added small strips of chipboard to one side so that it would be level when I place the solid heart beneath it.  Refer to photo of finished card.


Glue the Be Mine piece to the solid heart, as shown.


Adhere the filigree heart frame, tilting it slightly over the solid heart, as shown.


Adhere the pieces to the card front, as shown.   I was not sure where I was going to place the small lattice heart until I noticed that Mine from the Be Mine piece was "floating". 


 This is where it came in handy.  I slipped it under the word so it would support it.  However, I also determined that the Tin Can color was not right, so I gessoed it again and colored it the same as I did on the XOXO piece. 


Here it is with a pretty bow attached.


The second card is super easy and quick.  


I cut a piece of pink 12"x12" card stock in half at 6", so when folded in half, it would make a 6"x6" square card.  The print paper was from Making Memories that I had in my stash, but any similar paper you have on hand would work.  


I adhered some really pretty white lace along the folded edge of the card.


Each piece of chipboard was first gessoed, as usual, and then colored with the Prima ink pads.

Border hearts - inked with Sweet Pea and Blossom Tree
A Little Romance - inked with Blossom Tree
Lips - inked with Hydrangea and Blossom Tree
Delicata Golden Glitz was used on all chipboard pieces to bring out the gold in the paper.


To bring out the gold in the paper, I decided to hit the chipboard lightly with a Gold Delicate ink pad.


Adhere chipboard pieces, as shown below.  A few flowers and die cut leaves were added below the word art.  I also added the pink ink to color the two white flowers.  


Supplies used:
Printed scrapbook papers (Prima Rossibelle, Making Memories)
Fiskars bracket edge punch
Fern leaf die (Cheery Lynn)
Prima ink pads (Sweet Pea, Hydrangea, Blossom Tree, Old Rose, Vintage Pink, Tin Can, Turquoise Stone, Black Coal, White, Garden Green, Olive Green)
Prima 961961 Peeled Paint clear stamp 
Delicate Golden Glitz ink pad
Floral Embellishments (Recollections)
Lace strip
Blue organza ribbon
White gesso
Distress edger tool
Brown distress ink

I hope you have been inspired to use some beautiful chipboard pieces in your next card making project.  It not only adds dimension to your background, but not so much that it cannot be mailed.

Thanks so much for stopping by, and have a wonderful, crafty day!

Barbara

Thursday, January 5, 2017

Craft Hoarders Anonymous Blog Hop - January 2017

Happy New Year!  I hope you are ready for our quarterly blog hop.  As always, we will make something from our hoarded stash of supplies.  And best of all, we have some great prizes to give away.  


Theme: Winter, New Year’s, Calendar ideas, Valentine’s Day, Love/Anniversary
As you can see, I chose to make a Valentine's Day card. I had this pretty paper 
from K&Company called Smitten for years. I may have used a few pieces from 
this pad, but I seem to find it more pleasurable to decorate the inside of my 
drawer. Well, no more!
I thought it would be fun to share with you a picture of some of the stash I planned 
to use on this card but, as it turns out, I didn't use everything.
It's pretty simple, really. I made a card base to measure 5"x7", and layered a 
piece from the paper pad slightly smaller than the card base. I found these 
pretty aqua/gold doilies and layered that next. Some pretty heart shaped lace, 
topped with pleated pink ribbon was added along the left edge. I die cut two 
heart shapes, two solid hearts from different papers, and one gold flourished 
heart. These were layered on top of each other, as shown.
Next, I added three mini flowers and a pretty pink bow to the center heart. A 
print label was added with pop dots above the hearts, and two stamp images 
were adhered on either side of the heart.
These pieces were used to finish off the inside of the card.
I layered the vellum with printed phrase over the print square label, and centered 
on the card inside. Another label printed "love is in the air" was pop dotted and 
added over the square label. A border strip was cut in half and added along the 
top and bottom edge. Finishing off the card inside is just one more added detail, 
but usually so appreciated by the recipient.
I hope you have been inspired to check out what you are hoarding in your stash 
suitable for Valentine's Day. It isn't far off, you know. So take a look, you never 
know what you will find. I am always surprised at some of the amazing, but long-
forgotten things I come across.
Your next stop is the talented Donna Idlet's blog. Wonder what amazing creation she 
will come up with. The list of bloggers is shown below. Be sure to leave a 
comment on each blog for a chance to win a fab prize, and follow the blogs if 
you don't already. Then you won't miss all the neat stuff shared by these 
fabulous designers.
1. Gloria Stengel - giving a prize by random draw
2. Tracey Sabella - giving prize by random draw
3. Pam Bray - giving prize by random draw
4. Bonnie Garby - giving prize by random draw
5. Teresa Horner - giving a prize by random draw
6. Barbara Rankin - giving prize by random draw
7. Donna Idlet - giving prize by random draw
8. Marisa Job - giving prize by random draw
I will be giving away an entire monthly Cardmaker's kit from Hot Off The Press. 
(USA shipping only)

All you have to do is leave a comment
and follow my blog (if you don't already).

I will do a random draw on January19th and post the winner here, 
on my blog.


Thanks for stopping by, and enjoy the hop.

Barbara xo

Monday, February 8, 2016

A Faierie Sweet Valentine's Day Card and Matching Tag

Hello everyone!  It's Monday again, and I have another Altered Pages project for you.  I am still in card making mode, so today, I want to share another Valentine's Day card plus matching tag.  This month, we are proud to have Faerie Song Art Stamps as our sponsor.  Their stamps are deeply etched red rubber, and the selection of faeries is out of this world (no pun intended). 



Cut a 12x12 piece of blueish green card stock in half, then use your 
ScorPal scoring board to score in half for a 6x6 folded card.


Fussy cut around one of the Kaisercraft Botanical Odyssey Papers to fit the front of the card, ink edges with Leather Mixed Media Salazar Inkx using the Ranger Blending Tool and adhere it with Double Side Tape Mini.



Die cut scalloped heart shape from pink polka dot paper and a solid heart from the blue print paper with the Scallop Heart die.  Adhere the two hearts together with Double Side Tape Mini and use a Pigma Micron Pen to make a faux stitching line around the top heart.

Fussy cut a heart from the Heart of my Heart collage sheet and ink edges with Leather Mixed Media Salazar Inkx using the Ranger Blending Tool.  Adhere a piece of chipboard beneath it for added strength and Adhesive Dimensionals to raise it up off the card front.  This always gives nice dimension.



Stamp Elly from Faerie Song Art Stamps onto a piece of acrylic paper with black Stazon midi ink pad.  Color image with Gelatos and a water brush.  Do the same onto a piece of scrap white paper, leaving enough room around the image to cut out a tag shape.



Fussy cut image and edge with black Faber-Castell Big Brush Pen.    Adhere to card with Adhesive Dimensionals, as shown.

Make a double loop bow using the Sheer Ribbon and adhere to card front, as shown.  Stamp sentiment onto scrap of white card stock with Pink Neon Ink Pad and adhere to card front, as shown.



Stamp Elly from Faerie Song Art Stamps onto a piece of scrap white paper with black Stazon midi ink pad, leaving enough room around the image to cut out a tag shape. Color image as before.

For the tag, use the Nesting Frames 2 die to cut one large shape from the blueish green card stock and the next size down from the white sheet with the image stamped onto it.  I love this die because it is so versatile. It can be used a a pretty label, a rectangle if you cut both ends off, or a beautiful tag if you cut one end off, as I have shown.



Cut the bottom portion of both pieces off to form a straight bottom on the tag.  Adhere both together, punch a hole in the top center of the tag with a craft punch.  String Baker's Twine through the hole and attach to your gift.




Add a variety of Dew Drops for added magic.  



Altered Pages Supplies:

Scallop Heart die
Nesting Frames 2 die
Heart of my Heart collage sheet
Kaisercraft Botanical Odyssey Paper Pad
Acrylic Blocks
Waterbrushes
Gelatos
Faber-Castell Big Brush Pen
ScorPal scoring board
Mixed Media Salazar Inkx (Leather)
Ranger Blending Tool
Double Side Tape Mini
Adhesive Dimensionals
Pigma Micron Pen
black Stazon midi ink pad
Baker's Twine Multi Colors
Ribbon, Sheer
Electric Pink Neon Ink Pad
Dew Drops

Other supplies used:

Strathmore acrylic paper
Blueish green card stock
Scrap white paper



Did you know that Altered Pages has a huge selection of collage images that are perfect for Valentine's Day?  And each sheet contains so many different images that will help you create the perfect cards.


I hope you enjoyed my card and tag project today.  I also want to extend my appreciation to our sponsor this month, Faerie Song Art Stamps, for sending us these adorable faerie stamps to play with.  Be sure to stop by their website to see the magical selection of faeries available.  And please visit the Altered Pages blog regularly for daily inspiration from the fantabulous design team.  


Thanks for stopping by, and have a wonderful and very creative week!


Barbara

Friday, February 5, 2016

February 2016 Craft Hoarders Anonymous Monthly Blog Hop


Welcome to the February Craft Hoarders Anonymous Blog Hop! You should be coming to my blog from Teresa's blog. After visiting me, hop over to Karen's blog next! To start at the beginning of the hop, and for the full list of Bloggers, go to Gloria's Blog.

February is the month for love, so Valentine's Day is on my mind.  I am particularly fond of vintage, shabby chic, and pink!  I have some of my older papers in boxes which I have sorted by occasions.  In my Valentine's Day box, I found these beautiful papers from Memory Box, and I had even saved a couple of sheets of matching card stock that I had purchased while I had the print papers in my hot little hands.  

Here is my February inspiration!



This card measures 6"x6".  I cut the print paper slightly smaller than the card front and inked the edges with the Brilliance Pearlescent Purple ink pad.  

I die cut the scalloped heart from the light orchid card stock and inked the edges with the same Brilliance Pearlescent Purple ink pad.

Next, I die cut the plain heart from ivory card stock, then embossed it with the Chain embossing folder.  I edged the heart with a Krylon gold leafing pen, and again, I highlighted the embossing with the Pearlescent Purple ink pad before adhering it to the scalloped heart.

I used foam dots to adhere and raise the heart piece on the card front.

All that was left now was to decorate the card front with the various flowers, leaves, and trim from my stash.  The Love Notes die cut tag was added to the right of the flower bouquet.  

Simple, but elegant.

Supplies used:

Spellbinders dies:  Nested Hearts, Nested Scallop Hearts (largest size)
Card stocks:  Ivory, Orchid, Light Orchid
Print Paper:  Making Memories 12x12 LoveBirds Scallop Love Notes 
Making Memories Love Notes die cut tags
Embossing folder:  Chain (Lifestyle Crafts)
Ink Pads:  Brilliance Pearlescent Purple
Petaloo and Prima Flowers and Leaves
Ivory stem flowers (Joann's)
Gold leaves ribbon trim (my stash)

Here is the list of the participating Bloggers. Make sure to hop along and say hello! 



I hope we have inspired you to join us every month and de-hoard those supplies! 

Have a wonderful and creative weekend, but most of all, have fun!!!

Barbara

Monday, January 25, 2016

Valentine's Day Cards with Altered Pages

Hello everyone, and happy Monday.  Today, I want to share a couple of Valentine's cards with you. Did you know that Altered Pages has a huge selection of collage images that are perfect for Valentine's Day?  And each sheet contains so many different images that will help you create the perfect cards.



Let's get started with Card 1.


Card 1

Cut Red Cardstock to 9"x 6" and fold in half to make a 41/2" x 6 inch card.

Cut brown print paper  to 4-1/2" x 6" and emboss with an embossing folder.  Distress edges, and hit high spots with Jasmine, then Schoolhouse Red Mixed Media ink pads.  Dry ink with a heat tool.

Adhere to card front.



Delaminate a piece of Mica.   It is very easy to do.  Just slip the blade of a craft knife (or your fingernail) between layers and start peeling.   I was fortunate to find this piece in my package that resembled a funky heart shape, so I used it.  However, mica cuts easily with scissors, so just cut any heart shape you want.



Emboss the piece of delaminated Mica with an embossing folder.  I used one with cracks on it.  Look how the embossing has brought out this silvery reflection.  It really is amazing stuff.



Adhere it to the floral print paper with a thin coat of 3D Crystal Lacquer.  Trim excess paper.



Ink edges with Leather Mixed Media ink pad. 



Layer pieces as shown in the photo of the finished card above.  Punch a strip of red card stock with decorative punch and adhered along left side of card.  Add a bingo card beneath the mica heart.  (Check out the bingo cards selection here.)  I also fussy cut the little angel from one of the heart images and adhered to the top of the mica piece.  

I colored a 12" piece of Dyeable Seam Binding with a Faber-Castell red Gelato and water and let it dry before making a bow and adding it to the bottom portion of the card.  One last element was needed, the Proud Arrow was glued over the mica heart.


Card 2
Cut Red Cardstock to 9"x 6" and fold in half to make a 41/2" x 6 inch card.

Cut a piece of dark pink and pink stripe paper and glue together, cut to measure 4-1/2" x 6" before distressing the edges.  Adhere to card front.



Cut a square of light pink paper, distress edges and adhere to card front.  Cut a smaller square of Adhesive Corrugate paper (Kraft), distress right edge and adhere to card front, offsetting a bit, as shown.

Cut a Serviette Paper in half and using a Scor Pal, score every quarter inch, as shown.  Accordion fold along the score lines.  


Pinch bottom of serviette and staple ends together to form a fan shape.  Adhere to card front, as shown.



Fussy cut Heart with Cherub image and adhere over accordion folded serviette.

Make a bow with a length of Dyeable Seam Binding and add to bottom of card.  Stamp sentiment onto a scrap of ivory card with Schoolhouse Red Mixed Media Inkx and dry with heat tool. Punch corners with decorative punch and adhere to card next to the ribbon.

Lastly, cut apart five flowers from the Floral Trim and glue them above the fan shape, as shown.

Altered Pages Supplies:     
To Thy Own Self Be True collage sheet
Red Cardstock
More Glitz 6x6 Paper Pads (Hello December)
6x6 Glitz Paper Pads  (Pretty in Pink)
Adhesive Corrugate paper (Kraft)
Mixed Media Salazar Inkx (Jasmine, Schoolhouse Red, Leather)
Faber-Castell Gelatos (red)
Serviette Papers
Dyeable Seam Binding
Proud Arrows
Mica chips Natural
3D Crystal Lacquer
Scor Pal
Floral Trim
Aleene's Tacky Glue

Glue Stick
Adhesive Dimensionals
Double Side Tape Mini

Other supplies used:
Diamond Fence Trim punch (Martha Stewart)
Ivory card stock
Rubber Stamp (sentiment)
Embossing folders

I love the look of shabby chic, can you tell?  There is something about those worn edges on the paper layers that really excites me.  I think it is the texture, and I am all about texture and dimension.

I hope my project today has inspired you a bit and perhaps given you some ideas for you to try yourself.  Be sure to stop by the Altered Pages blog regularly for daily inspiration for the fantabulous design team.  

Thanks for stopping by, and have a wonderful and very creative week!

Barbara